average · peak 28.6%
FABERCAM BENCHMARK · 11 JULY 2026
Performance measured with a real 3D CAM workload.
FaberCAM v1.0.1372.1 measured with the standard 3 × 480-frame protocol, Balanced quality, and VSync disabled.
LOCAL VALIDATION PASSEDFABERCAM-BENCHMARK-V482.331s
Overall benchmark time
Lower is betterCPU · GPU · RAM
Live system telemetry
302 samples collected once per second throughout the test.
average · peak 100%
average · peak 905 MB
average · 31.8 GB
3 × 480 · 4× MOTION CYCLE
Category results
Each value is the median of three runs. The motion path repeats four cycles at its original speed.
TestTimemedian FPSp95 frame
01Rotate11.708 s41.031.98 ms
02Zoom13.041 s36.830.01 ms
03Pan11.540 s41.624.76 ms
04Section cut23.217 s20.749.43 ms
05Toolpath playback21.084 s22.848.06 ms
06Simulation1.740 s——
HARDWARE / PROTOCOL
Test system and method
- CPU
- Intel Xeon W-1250P · 6C / 12T
- GPU
- NVIDIA Quadro P2200 · OpenGL 4.6
- RAM
- 31.8 GB
- Configuration
- Balanced · 980 × 720 · VSync off
- max repeat spread
- 7.759%
- primary bottleneck
- Section cut
RUN 6CFCDF6F · SCHEMA V4
Publication and validation note
This result was produced with the official 3 × 480 configuration and passed local schema, correctness, and integrity checks. It is not an independent laboratory certification because server attestation was not applied.
SHA-256 · privacy-safe result · no machine name, user name, serial number, project data, or customer geometry.